The output channels are those of input A followed by those of input B. Joining a mono signal with a mono signal gives a two-channel bundle, and a stereo bundle with a mono signal gives three channels. Every channel is preserved exactly. The node has no parameters.
Use it to build a multichannel bundle from separate sources, or to pair a stereo bed with extra lanes. Use Select channels to take bundles apart again, Channel matrix to reroute or mix lanes, and Mixer to add signals together.
This node has no parameters. Its behavior comes from the width of the signals you connect. The channel count of the combined result is the sum of the channels on A and B, up to the 32-channel limit.
Each help patch is an ordinary Toy that teaches one idea. The diagram shows the Patch; the preview shows its Frame. Open it in TuneToys to play and edit it.
1. Join two mono signals into a bundle
beginner Teaches: multichannel
Two mono waves joined into one two-channel bundle.
Oscillator
MIDI1 lane
Audio1ch
Fundamental pitch, capped below Nyquist; detune uses cents. Range: 20–20000 Hz. Default: 220 Hz. Logarithmic scale. Units: Hz.
Hz
Output gain. Range: 0–0.5 ×. Default: 0.12 ×. Linear scale. Units: linear gain.
×
Selects the implemented algorithm. Choices are discrete and are not LFO targets. Range: 0–7. Default: 0. Linear scale. Units: unitless.
Cycle offset; Gate rising edges restart phase from this position. Range: 0–1 cycles. Default: 0 cycles. Linear scale. Units: cycles.
cycles
Pitch offset in cents. Range: -1200–1200 cents. Default: 0 cents. Linear scale. Units: cents.
cents
On or off. A rising edge retriggers; held on runs the oscillator or envelope. A control cable switches it at 0.5. Range: 0–1. Default: 1. Linear scale. Units: unitless.
Semitones a full pitch bend on the MIDI input moves the note, up or down. Range: 0–48 st. Default: 2 st. Linear scale. Units: st.
st
Time constant of the slide from one MIDI note's pitch to the next; 0 jumps. Range: 0–2000 ms. Default: 0 ms. Linear scale. Units: ms.
ms
Oscillator
MIDI1 lane
Audio1ch
Fundamental pitch, capped below Nyquist; detune uses cents. Range: 20–20000 Hz. Default: 330 Hz. Logarithmic scale. Units: Hz.
Hz
Output gain. Range: 0–0.5 ×. Default: 0.12 ×. Linear scale. Units: linear gain.
×
Selects the implemented algorithm. Choices are discrete and are not LFO targets. Range: 0–7. Default: 0. Linear scale. Units: unitless.
Cycle offset; Gate rising edges restart phase from this position. Range: 0–1 cycles. Default: 0 cycles. Linear scale. Units: cycles.
cycles
Pitch offset in cents. Range: -1200–1200 cents. Default: 0 cents. Linear scale. Units: cents.
cents
On or off. A rising edge retriggers; held on runs the oscillator or envelope. A control cable switches it at 0.5. Range: 0–1. Default: 1. Linear scale. Units: unitless.
Semitones a full pitch bend on the MIDI input moves the note, up or down. Range: 0–48 st. Default: 2 st. Linear scale. Units: st.
st
Time constant of the slide from one MIDI note's pitch to the next; 0 jumps. Range: 0–2000 ms. Default: 0 ms. Linear scale. Units: ms.
ms
Combine channels
A1ch
B1ch
Audio2ch
Audio output
Audio2ch
Note
Note
Patch: Oscillator “left” audio output connected to Combine channels a input. Oscillator “right” audio output connected to Combine channels b input. Combine channels audio output connected to Patch outputs audio input.Connections as text
Oscillator “left” audio output connected to Combine channels a input
Oscillator “right” audio output connected to Combine channels b input
Combine channels audio output connected to Patch outputs audio input
Combine does not mix. Input A becomes channel 1 and input B becomes channel 2.
The result has the combined width: 1 + 1 = 2 channels.
Frame preview (static). Controls show their default values.
